PC-Card Hardware.Radio Hardware. 802.11 frame format.WMAC controller with Station Firmware (WNIC-STA).
Lucent Orinoco Gold Windows 98 Update Not TypeD adapter from reseller Older PCI board version 015129 Rev A (1.0) Not PC99 compliant Assess Hardware Assess PCI version Lower than version 2.1 Version 2.2 or PC99 compliant Version 2.1 higher Ask PC Assess Manufacturer PCI header for BIOS update Not type header Also header type 2 Assess type 2 Assess Operating Operating System System Linux 2.0-2.2 Windows 98, ME Windows 2000 NT4 Windows 95 Enabler NT4 Swapbox detected Software provided PCMCIA.SYS Swapbox to be with distribution PC Card Update W2k: Reg file or Card Services autodetected Manual installationPCI adapter - success factors Type of Hardware: New desktops with only PCI slots: no incompatibility issues to be expected (exception for systems that have only PCI slots for reasons of size limitations) Desktops with mixture of PCI and ISA slots: BIOS needs to be of certain level (see below) BIOS level: Needs to be PCI version 2.2 compliant List of certified Hardware will be compiled throughout life-cycle based on tests and customer feedback Assess PCI Obtain Rev.
D adapter from reseller Older PCI board version 015129 Rev A (1.0) Not PC99 compliant Assess Hardware Assess PCI version Lower than version 2.1 Version 2.2 or PC99 compliant Version 2.1 higher Ask PC Assess Manufacturer PCI header for BIOS update Not type header Also header type 2 Assess type 2 Assess Operating Operating System System Linux 2.0-2.2 Windows 98, ME Windows 2000 NT4 Windows 95 Enabler NT4 Swapbox detected Software provided PCMCIA.SYS Swapbox to be with distribution PC Card Update W2k: Reg file or Card Services autodetected Manual installationPCI adapter - success factors Operating system: Windows 98 and Windows ME, will recognize the card and installation is straightforward Windows 95 requires the use of a different PCMCIA.INF file (provided separately by Agere Systems). Lucent Orinoco Gold Windows 98 Plus The AdditionWindows 2000 requires Service Pack 1 to be installed, plus the addition of an entry in the registry and Windows NT4 require installation of Enabler programs (provided by Agere Systems) or the use of 3rd part software such as Softex Manual installationPCI adapter - Windows 98 Install the PCI card without the ORiNOCO PC Card inserted, in an available slot The PCI card itself is plug and play Windows 98 will detect the adapter and start the installation Follow instructions on the screen and re-boot when advised Verify the settings in the device Manager (see capture left) Manual installationPCI adapter - Windows 95 Install the PCI card without the ORiNOCO PC Card inserted, in an available slot The PCI card itself is plug and play and will auto-detect the card, and the driver for the generic PCIC controller is installed Copy the file PCMCIA.INF provided by Agere Systems to the sub-directory windowsinf Manual installationPCI adapter - Windows 95 Reboot the PC Proceed to Device Manager, select the PCIC controller and update the driver (Windows will locate the new.INF file) Restart the PC Windows now installed the correct TI1410 Cardbus controller Manual installationPCI adapter - WinNT 4 HW PCI-Enabler If possible use a 3rd part Card Manager such as Softex. Lucent Orinoco Gold Windows 98 .Exe Program ThatExecute the Setup.exe program that is on the installation diskette Follow the instructions on the screen and restart the system Manual installationPCI adapter - WinNT4 Card Socket Services On the Control Panel select Devices From the device list select PCMCIA Click the Startup button on the right side of the list Set the Start-up type for the PCMCIA device to Boot Close the window (select OK) and reboot Manual installationUSB Client adapter - Win98 2K Have the USB Client Driver software accessible by the OS Connect the ORiNOCO USB Client to the PC Windows will detect the ORiNOCO USB Client as new hardware and start its wizard Alternatively select Add New hardware from the Control Panel Direct the wizard to the location of the driver files Manual installationUSB Client adapter - Win98 2K Follow the instructions on the screen: Provide the requested driver parameters Restart the computer if requested After Installation USB Client is available in the network configuration Manual installationClient Manager Software Use Explorer to browse CD-ROM to the location where Client Manager Setup is stored Follow on-screen directions When started Client Manager displays itself by Icon on the task bar, indicating RF status: Color Number of columns Right-click on icon presents Client Manger menu Starting the client manager Selectingchanging a profile Asking for version data Client Manager Interpreting the Icon The Client Manager Icon on the task bar can take different shapes and colors Use help to obtain information on how to interpret the icon Client Manager Version information Version information important for diagnostic purposes. Identifies version of Client Manager Utility SW PC Card driver PC Card Hardware PC Card Firmware Operating the Client Manager Main screen Windows 95NT982000 Can be started from the Start Menu or via task-bar Icon Integrates diagnostic functions and PC Card configuration setting Welcome screen shows general status: Network name Link Qualification AP name (if applicable) Channel Encryption status Operating the Client Manager Profile selection Current profile is identified on welcome screen Other profile can be selected from the drop down list that holds available profiles Operating the Client Manager Profile selection Alternatively profiles can be selected from the Actions item on the menu bar Actions item also holds capability to add or change a configuration profile Operating the Client Manager Diagnostic functions Diagnostic functions are available via the Advanced item on the menu bar: PC Card diagnostics RF Link test Site Monitor Operating the Client Manager Diagnostic functions - test card Card Diagnostics runs a series of tests on different elements of the communication HW and SW to check the integrity of the device For support purposes a report can be generated Operating the Client Manager Diagnostic functions - link test RF link test is the single most important test to verify the quality of the wireless link between two stations In AP mode link test is always between client station and AP In peer to peer mode link test is executed between client station and another client to be selected from a list of explored stations Test results show snapshot readings of SNR, Signal and Noise and indication of attainable data-rate Operating the Client Manager Diagnostic functions - history chart History test shows selected values over time Values to be displayed can be selected from drop list: SNR Signal and Noise (two separate lines) Ranges for Noise, Signal or SNR Very useful to detect noise spikes Operating the Client Manager Diagnostic functions - logging Test results can be logged to disk for later analysis User identified file Manual logging (on user command) Automatic logging (after every x seconds) Continuous logging Operating the Client Manager Diagnostic functions - Site Monitor Site monitor allows a user to see all APs with the same network name, from a location. ![]() Names are maintained in file aplist.txt in association with the MAC address of the PC Card in the AP Can be created by editing or using AP names discovery function Module Summary Station Firmware Driver installation configuration Adding editing profiles Manual installation Client Manager Your Mobile Broadband Connection.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |